LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Collision - Body Panel Repair (F01, F02)) >> Body Repair General Information >> 41 00... Opening Weld Joints >> 3. Opening Laser Weld Seams >> Procedure

3. Opening Laser Weld Seams: Procedure

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Roughly cut roof outer skin in the roof channel to improve accessibility.

Place angle grinder with grinding disc on laser weld seam and grind through top metal sheet. Be careful not to cut through and damage sheet metal underneath.

Remove sheet metal flange.

scientia non olet · About LEMON Manuals