65 77 532 Removing and installing/replacing front left sensor (US version only): Installation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Holder (2) must be correctly seated in the designated guides.

Fig 1: Identifying Screw, Holder And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on lock carrier (2).

Tightening torque 65 77 2AZ .

Feed out sensor (3).

Unfasten plug connection (2) and disconnect.

Installation:

Make sure sensor (3) is in correct installation position.

Sensor surface must point upwards.

Plug connection (2) must point in opposite direction to direction of travel.

Fig 2: Identifying Screws, Lock Carrier, Plug Connection And Sensor

Courtesy of BMW OF NORTH AMERICA, INC.