1. General information on handling rubber seal profiles
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
- If seals reveal partly detached protective film on delivery, they must not be bonded.
- Store seals at 5°C to 40°C.
- If, during the handling, the protective film has come off before bonding, it can still be bonded.
- Bonding at room and object temperature 25° ± 5°C. Temperatures between 40 and 50°C significantly increase initial adhesion.
- Seals, which are subjected to temperatures above 80°C after bonding, will be very difficult to remove.
- Maximum storage time for replacement: 2 years (expiry date must be indicated on the packaging)