LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Wheel And Tires - Repair - F01/F02) >> Disc Wheels (Rims) >> 36 11 533 Removing and installing/replacing a tire pressure control electronic wheel module (Generation I) >> Labelling of Gen3 electronic wheel module for RDC-LC

Labelling of Gen3 electronic wheel module for RDC-LC

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Data Matrixcode
  2. BMW part number
  3. FCC ID radio authorization
  4. Electronic wheel module
  5. Transmission frequency
  6. Pressure sensor
  7. Width across flats of union nut
  8. Tightening torque
  9. Production date of electronic wheel module
    Fig 1: Labelling Gen3 Electronic Wheel Module (RDC-LC)
    G06890137Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The following graphics show exclusively how to install and remove the SP-303 electronic wheel module. The handling instructions also apply without any differences to the Gen3 electronic wheel module!
scientia non olet · About LEMON Manuals