LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Trailers - Repair - F01/F02) >> 8621 Hood >> 86 21... Removing roof railing >> Installation

86 21... Removing roof railing: Installation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Check molded sealing parts for faults and replace if necessary. Pay attention to identification of molded sealing parts and position accordingly.

Check butylene tape seal.

Use new screws. Coat all screws with OKS 90 thread locking adhesive.

First screw down railing adapter in middle. Then press roof railing downwards with a force of approx. 50 N. Then screw down railing adapter at front and rear.

Tightening Torque for roof railing at front and rear, 86 21 1AZ

Tightening Torque for roof railing in middle, 86 21 2AZ

Fig 1: Identifying Roof Railing With Bolt
G06886922Courtesy of BMW OF NORTH AMERICA, INC.