LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Brakes - Repair - F01/F02) >> Brake Testing And Bleeding >> 34 00 010 Checking thickness of brake pad

34 00 010 Checking thickness of brake pad

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The thickness of the outer brake pads can be determined without removing the wheels.

If necessary, move car until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

NOTE:
  1. Brake disc
  2. Brake pad with backplate

Safe limit for front brake lining wear: see TECHNICAL DATA - FRONT BRAKES .

Safe limit for rear brake lining wear: see TECHNICAL DATA - REAR BRAKES .

Fig 1: Inserting Special Tool (34 1 260) Rim Into Opening For Brake Pad Wear Indicator
G06889920Courtesy of BMW OF NORTH AMERICA, INC.