34 51 Traction control system (DSC)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRACTION CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Control unit to hydraulic unit | F01, F02, F03, F04, F07, F10, F11, F12, F18 | Initial torque | 2 ± 0.5 Nm | |
| Final torque | 4.3 + 0.5 Nm | ||||
| 2AZ | ICM control unit to body | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | Replace screws. | 8 Nm | |
| 3AZ | Pulse sensor to swivel bearing/wheel carrier | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M6x16 | 8 Nm | |
| Pulse at the front trunnion-wheel vehicles | F01, F02, F04, F07, F10, F11, F12 | M6x16 | Hex bolt SW 10 replace screw |
12 Nm | |
| 4AZ | Hydraulic unit to holder | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M8 | 8 Nm | |
| 5AZ | Holder, hydraulic unit, to body | F01, F02, F03, F04, F07, F10, F12, F11, F18 | 19 Nm | ||
| F25 | M6 | 8 Nm | |||
| 6AZ | Pulse sensor adapter to swivel bearing | F03 | M6 | 8 Nm | |