33 34 060 Removing and installing/replacing control unit for rear axle slip control: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove BATTERY

Unlock plug connection (1) on control unit (2) and disconnect.

Fig 1: Identifying Plug Connection And Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove control unit (2).

Tightening torque 33 34 5AZ .

Fig 2: Identifying Nut And Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.