24 13 Transmission Extension, Bearings, Seals
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Double hexagon nut/output flange | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | with sealing ring in output flange | 60 Nm | |
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Slotted nut/output flange | A5S 310Z/A5S 440Z/A5S 560Z/A5S 325Z | 120 Nm | ||
| 2AZ | Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange |
80 Nm | |
| GA6HP19Z/GA6HP26Z | from 09/02 with sealing ring in output flange |
60 Nm | |||
| 3AZ | Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm | |