33 32 160 Removing and installing/replacing compression strut for rear axle carrier
IMPORTANT:
Observe safety instructions for raising the vehicle
Driving without the compression strut is not permitted!
Driving without the compression strut is not permitted!
Necessary preliminary tasks:
- Remove exhaust system. See REMOVING COMPLETE EXHAUST SYSTEM (N20)REMOVING COMPLETE EXHAUST SYSTEM (N54) .
- Remove tunnel thermal insulation
IMPORTANT:
Risk of damage!
Support rear axle carrier at front middle with workshop jack.
Release nuts and remove compression strut.
Secure rear axle carrier by screwing on nuts.
Installation:
Replace self-locking nuts.
Tightening torque 33 32 7AZ .