51 61 011 Removing and installing/replacing V-strut, front axle carrier, left or right
IMPORTANT:
Observe safety instructions for raising the vehicle
Driving without V-struts is not permitted!
Necessary preliminary tasks:
- Remove FRONT UNDERBODY PROTECTION
Release bolt (1).
Tightening torque 51 71 10AZ .
Release bolt (2).
Tightening torque 51 71 10AZ .
Release bolt (3).
Tightening torque 51 71 10AZ .
Remove V-strut (4) towards front.
Installation:
Replace bolts.
Make sure bolts are installed in correct positions.
- Bolt (1) M12x30
- Bolt (2) M10x33
- Bolt (3) M10x45