65 13 188 Removing and installing/replacing mid-range speaker (in upper partition panel)

Special tools required:

Lever out rear speaker trim (1) with special tool 00 9 323 from partition panel (2) and remove.

Fig 1: Removing Rear Speaker Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever plug connection (1) out of mounting and disconnect.

Unfasten screws (2).

Feed out speaker (3) towards front and disconnect associated plug connection.

Fig 2: Identifying Speaker, Screws And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.