23 14 ... Replacing reversing light switch

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Remove rear UNDERBODY PROTECTION

Only transmissions GS6-17DG/BG and GS6-37DG/BG

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

NOTE: Graphic similar

Fig 1: Identifying Plug Connection On Reverse Gear Switch (GS6-17DG/BG And GS6-37DG/BG)

G04726012

Only transmission GS6-53DG/BG

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

NOTE: Graphic similar

Fig 2: Identifying Plug Connection On Reverse Gear Switch (GS6-53DG/BG)

G05476320

Only transmission GS6-45DZ/BZ

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

Fig 3: Identifying Plug Connection On Reverse Gear Switch (GS6-45DZ/BZ)

G09847992