18 31 Exhaust pipe with catalytic converter/complete system
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST PIPE WITH CATALYTIC CONVERTER/COMPLETE SYSTEM
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust system to front pipe with catalytic converter | N54/N54T | M8 | 21 Nm | |
| 2AZ Exhaust system to bracket, transmission | N54/N54T | M8 | 19 Nm | |
| 3AZ Catalytic converter to turbocharger | N54/N54T | M8 | Replace profile clamp and bolt. | 13 Nm |
| 4AZ Exhaust system to bracket on rear axle carrier | N54/N54T | M8 | 19 Nm | |
| 5AZ Rear silencer to body | N54/N54T | M8 | 19 Nm |