23 00 Transmission in general
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| TRANSMISSION DESIGNATION | Type | Thread | Tightening specifications | Dimension |
|---|---|---|---|---|
| 2AZ Gearbox to clutch housing | B/C/D/E/F/G/H/I/7-speed SMG | M12 | 76 Nm | |
| 3AZ Reinforcement shell to transmission | B/C/D/E/F/G/H/I/7-speed SMG | M8 | 23 Nm | |
| 4AZ Oil drain plug/oil filler plug | B/C transmission | 50 Nm | ||
| D/E-transmission | 52 Nm | |||
| G/H-transmission | M18x1.5 hexagon socket | 35 Nm | ||
| H/I-transmission | M12x1.5 | 25 Nm | ||
| C/I-transmission | M18X1.5 | Steel screw without gasket | 45 Nm | |
| 7-speed SMG | 40 Nm | |||
| 5AZ Transmission extension | G/H-transmission | M10 | 46 Nm |