11 13 Oil sump

WARNING: This page is about a different variant/trim than selected.

TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP

	Type	Thread	Tightening specifications	Dimension
1AZ Plug Oil drain to oil sump.	N54/N54T	M12 x 1.5	Replace sealing ring.	25 Nm
2AZ ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue).	N54/N54T	M8 x 26	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail.
			Jointing torque	8 Nm
			Angle of rotation	60 °
3AZ ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue).	N54/N54T	M8x112/M8x92	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail.
			Jointing torque	8 Nm
			Angle of rotation	180 °
4AZ ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue).	N54/N54T	M8 x 36	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail.
			Jointing torque	8 Nm
			Angle of rotation	90 °
5AZ ASA screw Oil deflector to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue).	N54/N54T	M6 x 20	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail.
			Jointing torque	4 Nm
			Angle of rotation	90 °
6AZ ASA screw Transmission to oil sump.	N54/N54T	M8 x 50		19 Nm
7AZ Hexagon screw Holder, transmission oil cooler line, to oil sump.	N54/N54T	M6 x 30		8 Nm
8AZ Hexagon nut Oil level sensor to oil sump.	N54/N54T	M6		8 Nm
9AZ Transmission fluid cooler bracket to oil sump	N54/N54T	M8		9 Nm