11 25 Pistons with Rings and Pins N54
WARNING: This page is about a different variant/trim than selected.
PISTONS WITH RINGS AND PINS SPECIFICATION
| 1st groove |
|
|
| End clearance |
mm |
0.18...0.33 |
| Axial play |
mm |
0.020...0.060 |
| 2nd groove |
|
|
| End clearance |
mm |
0.30...0.50 |
| Axial play |
mm |
0.020...0.060 |
| 3rd groove |
|
|
| End clearance |
mm |
cannot be measured |
| Axial play |
mm |
cannot be measured |