SI number

WARNING: This page is about a different variant/trim than selected.

01 20 06 (299)

Fig 1: Identifying Removal And Fitting Aid (118530)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

NOTE: (base plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

2 = 0495730 Plate

NOTE: (pressure plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

3 = 0495731 Spindle

NOTE: (spindle (pressure plate)) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

4 = 0495732 Spindle

NOTE: (spindle (unmounting plage)) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

5 = 0495733 Screw

NOTE: (Set of screws M10 (N54)) Available with complete set 11 8 530 = 83 30 0 495 728 only.

6 = 0495734 Screw

NOTE: (Set of screws M11 encl. sleeve (N53)) Liquidation of existing inventory and then available with complete set 11 8 530 = 83 30 0 495 728 only.

7 = 0495735 Plate

NOTE: (unmounting plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

8 = 0496704 Bush

NOTE: Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only.

In conjunction with: 11 8 530 = 0495728