67 62 020 Removing and installing/replacing flat motor for rear left or right power window lifter

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove rear left or right POWER WINDOW UNIT

Release screws (1) on power window unit (2).

Tightening torque 67 62 1AZ .

Fig 1: Identifying Screws On Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Detach flat motor for power window unit (2) from power window unit (1).

Installation:

INITIALIZE POWER WINDOW .

Fig 2: Identifying Flat Motor With Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.