LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Body Equipment - Repair) >> 5123 Hood Latch, Locks >> 51 23 201 Removing and installing/replacing release mechanism for catch on engine hood/bonnet

51 23 201 Removing and installing/replacing release mechanism for catch on engine hood/bonnet

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) on hood/bonnet (2).

Disengage Bowden cable (4) from hood/bonnet release mechanism (3).

Remove hood/bonnet release mechanism (3).

Installation: 

Replace self-locking screws.

Fig 1: Identifying Bowden Cable Of Hood/Bonnet Release Mechanism And Screws On Hood/Bonnet
G06885650Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals