LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Body Equipment - Repair) >> 5112 Rear Bumper >> 51 12 825 Removing and installing/replacing guide for rear center bumper

51 12 825 Removing and installing/replacing guide for rear center bumper

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

Detach wiring harness (1).

Unfasten screws (2).

Remove guide for bumper (3).

Fig 1: Identifying Rear Center Bumper With Wiring Harness And Screws
G06911582Courtesy of BMW OF NORTH AMERICA, INC.