Necessary preliminary tasks
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove EXPANSION TANK .
- Read and comply with GENERAL INFORMATION .
IMPORTANT:
Do not bend brake lines.
Unfasten brake lines (1).
Installation:
Tightening torque 34 32 1AZ .
Close off brake lines and brake master cylinder with plugs 32 1 270 .
Release nuts (2) and feed brake master cylinder out of brake booster.
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ .