LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Brakes - Repair) >> 3411 Front Brakes >> 34 11 667 Precision-turning both front brake discs on both sides >> Stationary brake disc lathe

Stationary brake disc lathe

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only BMW-approved brake disc lathes may be used!

In the case of stationary brake disc lathes, the brake disc must be removed.

Please refer to the lathe manufacturer's instruction manual for the exact procedure.

Fig 1: Identifying Stationary Brake Disc Lathe
G04726610Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals