00 00 M18 and M18x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M18 AND M18X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface colour/(surface coating) | |||
| M18 thread | yellow (ZN) | M18 8.8 | 280 Nm | |
| silver (ZNS) | M18 8.8 | 225 Nm | ||
| yellow (ZN) | M18 10.9 | 390 Nm | ||
| silver (ZNS) | M18 10.9 | 330 Nm | ||
| yellow (ZN) | M18 12.9 | 470 Nm | ||
| silver (ZNS) | M18 12.9 | 365 Nm | ||
| M18x1.5 thread | yellow (ZN) | M18 x 1.5 8.8 | 313 Nm | |
| silver (ZNS) | M18 x 1.5 8.8 | 245 Nm | ||
| yellow (ZN) | M18 x 1.5 10.9 | 440 Nm | ||
| silver (ZNS) | M18 x 1.5 10.9 | 360 Nm | ||
| yellow (ZN) | M18 x 1.5 12.9 | 527 Nm | ||
| silver (ZNS) | M18 x 1.5 12.9 | 400 Nm |