00 00 M12 and M12x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M12 AND M12X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface colour/(surface coating) | |||
| M12 thread | yellow (ZN) | M12 8.8 | 82 Nm | |
| silver (ZNS) | M12 8.8 | 66 Nm | ||
| yellow (ZN) | M12 10.9 | 115 Nm | ||
| silver (ZNS) | M12 10.9 | 98 Nm | ||
| yellow (ZN) | M12 12.9 | 140 Nm | ||
| silver (ZNS) | M12 12.9 | 108 Nm | ||
| M12x1.5 thread | yellow (ZN) | M12 x 1.5 8.8 | 87 Nm | |
| silver (ZNS) | M12 x 1.5 8.8 | 68 Nm | ||
| yellow (ZN) | M12 x 1.5 10.9 | 123 Nm | ||
| silver (ZNS) | M12 x 1.5 10.9 | 100 Nm | ||
| yellow (ZN) | M12 x 1.5 12.9 | 147 Nm | ||
| silver (ZNS) | M12 x 1.5 12.9 | 110 Nm |