00 00 M10 and M10 x 1 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M10 AND M10 X 1 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface colour/(surface coating) | |||
| M10 thread | yellow (ZN) | M10 8.8 | 47 Nm | |
| silver (ZNS) | M10 8.8 | 38 Nm | ||
| yellow (ZN) | M10 10.9 | 66 Nm | ||
| silver (ZNS) | M10 10.9 | 56 Nm | ||
| yellow (ZN) | M10 12.9 | 79 Nm | ||
| silver (ZNS) | M10 12.9 | 62 Nm | ||
| M10x1 thread | yellow (ZN) | M10 x 1 8.8 | 54 Nm | |
| silver (ZNS) | M10 x 1 8.8 | 41 Nm | ||
| yellow (ZN) | M10 x 1 10.9 | 75 Nm | ||
| silver (ZNS) | M10 x 1 10.9 | 60 Nm | ||
| yellow (ZN) | M10 x 1 12.9 | 91 Nm | ||
| silver (ZNS) | M10 x 1 12.9 | 67 Nm |