11 24 Connecting Rods and Bearings N52K B30
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS SPECIFICATION
| Large connecting rod eye (without bearing) | mm | 53.600+0.016 |
| Conrod bushing: Inside diameter | mm | 20.000 +0.013+0.004 |
| Connecting rod bearing, installation clearance | mm | 0.025... 0.061 |
| Permissible total deviation of connecting rods in one engine (without bearing shells) |
g | ± 5 |