00..... Symbols used and information in repair instructions: Recycling
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Observe country-specific waste disposal regulations
General information:
Refers to other instructions: such as e.g.:
Necessary preliminary tasks;
Further instructions: refer to operating instructions for balancing machine.
Replacement:
Carry out programming/encoding.
NOTE:
Many electronic control units must be programmed/coded (e.g. when replaced).
Note (previous symbol):
- Connect BMW diagnosis system
Note (symbol for new diagnosis system ISID):
- Connect BMW diagnosis system
IMPORTANT:
Read and comply with notes on protection against damage from electrostatic damage (ESD protection).
NOTE:
Electronic control units and other electronic components - if handled incorrectly - can be damaged or destroyed by electrostatic discharge.