21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 8.8 | Replace screws | 25 Nm |
| E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85/S65 | Jointing torque Torque angle |
15 Nm 25 ° |
||
| N52/N53/N52K/M47T2/N45T/N54/N46T/N43/N45K/N47/M57T2/N47S/N62TU/N57 | M8 10.9 | Jointing torque Torque angle |
15 Nm 90° ± 5° |