00 00 M14 and M14x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M14 AND M14X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface colour/(surface coating) | |||
| M14 thread | yellow (ZN) | M14 8.8 | 130 Nm | |
| silver (ZNS) | M14 8.8 | 104 Nm | ||
| yellow (ZN) | M14 10.9 | 180 Nm | ||
| silver (ZNS) | M14 10.9 | 155 Nm | ||
| yellow (ZN) | M14 12.9 | 220 Nm | ||
| silver (ZNS) | M14 12.9 | 170 Nm | ||
| M14x1.5 thread | yellow (ZN) | M14 x 1.5 8.8 | 143 Nm | |
| silver (ZNS) | M14 x 1.5 8.8 | 110 Nm | ||
| yellow (ZN) | M14 x 1.5 10.9 | 200 Nm | ||
| silver (ZNS) | M14 x 1.5 10.9 | 165 Nm | ||
| yellow (ZN) | M14 x 1.5 12.9 | 240 Nm | ||
| silver (ZNS) | M14 x 1.5 12.9 | 180 Nm |