51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Necessary preliminary tasks: 

• Remove FRONT INNER ENTRANCE COVER STRIP 
• Remove TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT 

Detach mucket (1) in area of trim (2). See SEAL ON FRONT DOOR  and NOTES ON SEALING INSTALLATION .

Unclip panel (2) in direction of arrow at retaining points (3) and remove.

Fig 1: Removing Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Preinstall clip (1) in trim (2).

Fig 2: Identifying Clip On Trim

Courtesy of BMW OF NORTH AMERICA, INC.