34 51 Slip control system (DSC)
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | E89 | Initial tightening Final tightening | 2±0.5 Nm 4.3+0.5 Nm | |
| 2AZ DSC sensor to holder | E89 | 8 Nm | ||
| 3AZ Bracket, DSC sensor, to body | E89 | 8 Nm | ||
| 4AZ Pulse generator to swivel bearing/wheel carrier | E89 | 8 Nm | ||
| 5AZ Bracket to hydraulic unit | E89 | 8 Nm | ||
| 6AZ Bracket, hydraulic unit to body | E89 | 8 Nm |