34 41... Electromechanical parking brake - emergency release
Necessary preliminary tasks:
- Remove PARKING BRAKE ACTUATOR on left and right
IMPORTANT:
Secure vehicle against rolling, e.g. with chocks.
Using an 7 mm WAF Allen key (1), turn back brake caliper spindle in clockwise direction.
Turn back until wheel can turn freely.
IMPORTANT:
Do not turn the spindle to the end stop.
At the end stop a fault code is set which will cause the system to shut down!
If this is the case, clear the fault memory
At the end stop a fault code is set which will cause the system to shut down!
If this is the case, clear the fault memory
NOTE:
Startup after circuit interruption:
- Switch on ignition.
- Press brake button with brake pedal depressed.
- The indicator lamp in the instrument cluster goes out as soon as the parking brake is released.