Removing and installing/replacing airbag module for passenger knee protection (X5 M)
WARNING:
Read and comply with SAFETY REGULATIONS FOR HANDLING AIRBAG SYSTEM COMPONENTS.
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
Attention!
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Necessary preliminary tasks:
Removal:
Release screws (1).
Unclip airbag module (2) and unlock and disconnect PLUG CONNECTION located behind.
Installation:
Connect the connector to the airbag module (2).
Replace screws (1).
Parts: Bolts
Clip in airbag module (2) and tighten the screws (1).
Tightening torque 72 12 3AZ .
Required reworking: