Remove and install (replace) the power window regulator in the left or right front door (X5 M)
NOTE:
Disengage, but do not remove, the door window glass and secure it in the window frame.
Necessary preliminary taste:
- Release the FRONT DOOR WINDOW GLASS .
- REMOVING SPEAKER
.
Release cable in area (A) from holder.
Release nuts (1) and feed out rear section of power window unit (2).
Tightening torque 51 33 2AZ .
Slacken nuts (1) and carefully remove front section of power window regulator (2).
Tightening torque 51 33 2AZ .
Replacement:
Remount FLAT MOTOR .