Removing and installing/replacing guide for rear center bumper panel (X5 M)

Necessary preliminary taste:

If necessary, unlock plug connection (1) and disconnect.

Unscrew nuts (2).

Tightening torque 51 12 4AZ .

Release guide (3) from latch mechanism (4) and remove.

Replacement (depending on version):

Remount SENSOR (5) for lane change warning.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms of guide must not be damaged or missing.

Replace faulty sheet metal nuts.

Courtesy of BMW OF NORTH AMERICA, INC.