51 22 360 Replacing seal for door gap/roof frame on left or right rear door

Special tools required:

Lever out seal (2) on door window frame at front (1) with special tool 00 9 317 .

Fig 1: Removing Door Window Frame Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off seal (1) beginning at the front toward the rear.

Installation note:

Thread in seal (1) in window frame first on the inside and then on the outside.

Fig 2: Pulling Window Frame Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Vehicle type Touring only:

Feed in the plastic lug (2) of the seal (1) correctly at the top rear window frame corner.

Fig 3: Identifying Door Plastic Lug And Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip seal (2) from inside door leaf (1) at bore holes.

Fig 4: Removing Door Seal From Inside Door Leaf

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Moisten seal with water for easier mounting.