61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation

Special tools required:

00 9 323

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary work:

Disconnect BATTERY EARTH LEAD
Disconnect both negative battery cables at F03

Carefully lever out side cover (1) with special tool 00 9 323 .

Fig 1: Disconnecting Lever Out Side Cover With Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock latch mechanisms (4) in direction of arrow.

Feed switch for front passenger airbag deactivation (2) out of side cover (3).

Installation note:

Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).

Fig 2: Feeding Front Passenger Airbag Deactivation Switch Of Side Cover

Courtesy of BMW OF NORTH AMERICA, INC.