51 21 360 Replacing seal for door seam/roof frame on left or right front door

Do not scratch or damage visible surfaces.

Lever out plastic rivet (3) at top rear.

Installation note:

Correctly feed in seal (2) under frame trim (1) and window frame trim (5).

Fig 1: Identifying Front Door Plastic Rivet, Seal And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out plastic rivet (2) on seal (1) at inside front.

Fig 2: Identifying Front Door Plastic Rivet And Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed in seal (1) at front again correctly under door edge aperture and feed in frame trim (A → B).

Fig 3: Identifying Under Door Edge Aperture And Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out seal (1) from inside.

Fig 4: Removing Door Seal

Courtesy of BMW OF NORTH AMERICA, INC.