63 13 200 Removing and installing/replacing front left or right auxiliary direction indicator

Special tools required:

00 9 322

IMPORTANT: Risk of damage in vehicles with parking assist (PMA)!

IMPORTANT: There must be no pressure exerted on PMA sensor surface (1)!

Fig 1: Identifying PMA Sensor Surface

Courtesy of BMW OF NORTH AMERICA, INC.

Lift front auxiliary direction indicator lamp (1) with special tool 00 9 322 . Release additional catches in the center in the direction of arrow using a suitable tool.

Fig 2: Identifying Special Tool (00 9 322)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove front auxiliary turn signal lamp (2).

NOTE: The number of plug connections may vary, depending on the vehicle outfitting.

Fig 3: Identifying Plug Connections And Signal Lamp

Courtesy of BMW OF NORTH AMERICA, INC.