63 21 183 Removing and installing/replacing left or right rear light (on tailgate)

Necessary preliminary tasks:

Slacken nut (1).

Disconnect plug connection (2).

Installation note:

For special version Softclose:

Release screws (3) and slide drive for Softclose (4) slightly rearwards.

Fig 1: Identifying Plug Connection, Slacken Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lift rear light (1) toward the rear and remove from rear lid (2) in direction of arrow.

Fig 2: Removing Rear Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure bracket (1) is correctly seated.

Guides (2) of rear light (3) must not be damaged.

Fig 3: Identifying Rear Light, Guides And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove BULBS .