51 34 191 Replacing left or right fixed door window glass in rear window frame

Necessary preliminary tasks:

Release screw (1).

Tightening torque 51 35 13AZ .

Installation note:

If necessary, apply new butyl in area of fastener (1) between fixed door window glass and window frame.

Fig 1: Identifying Window Frame Fastener And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: 51 35 3AZ .

Fig 2: Identifying Door Window Glass Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Move window frame forward at the bottom and clear of frame trim.

Tilt window frame slightly out and carefully lift it clear.

Installation note:

To facilitate installation, wet rubber parts of window frame with water. Work window frame correctly behind the retaining clips of the frame trim.

Fig 3: Removing Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.