51 16 368 Replacing right glovebox with enclosure

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks: 

• Remove DAMPER FOR GLOVEBOX 

Modify glovebox light (1).

If necessary, modify cover (2)

Modify cover (3).

Fig 1: Identifying Glovebox Light And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on glovebox cover (2).

Remove glovebox cover (2).

Fig 2: Identifying Glovebox Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.