51 47 312 Replacing footrest for front passenger compartment

Necessary preliminary work: 

• Remove trim panel for pedal mechanism  . See 51 45 184 REMOVING AND INSTALLING (REPLACING) TRIM PANEL FOR PEDAL MECHANISM (ECE ONLY)  or 51 45 184 REMOVING AND INSTALLING (REPLACING) TRIM PANEL FOR PEDAL MECHANISM (US ONLY) .

Adhesive bead must remain on carpet (risk of damage).

Preheat footrest (1) with hot air blower and therefore loosen adhesive bead from footrest (1).

If necessary, tension footrest (1) with panel wedge and apply heat to pull off inwards.

Fig 1: Identifying Footrest

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

If required, preheat footrest (1) with hot air blower and apply adhesive bead along line (2) with a hot-glue gun.

Fit footrest (1) to carpet and bond.

Fig 2: Identifying Preheat Footrest And Carpet Line

Courtesy of BMW OF NORTH AMERICA, INC.