LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> M235i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> General Electrical System - Repair - F23 >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ

61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ

Manufactured by AMP:  The following contact types without strand sealing can be fitted in the connector housings:

Socket housing, 5-pin (Hybrid System MQS/MPQ) 

Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).

Fig 1: Raising Connector Contact Carrier Fastener
G08509510Courtesy of BMW OF NORTH AMERICA, INC.

Socket housing, 8-pin (MQS): 

Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).

Fig 2: Raising Connector Contact Carrier Fastener
G08509511Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (1) of contact and pull cable with contact as far as secondary lock (2).

Fig 3: Pulling Connector Wire With Socket Contact
G04727548Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook in secondary lock (1) again and pull cable with contact (2) completely out of contact carrier (3).

Fig 4: Pulling Connector Cable With Socket Contact
G04727549Courtesy of BMW OF NORTH AMERICA, INC.