65 13 062 Removing and installing/replacing speaker (tweeter, in dashboard)

Special tools required:

Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.

Fig 1: Removing Trim With Special Tool (00 9 327)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs and clamps at marked points must not be damaged.

Fig 2: Locating Retaining Lugs And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull out mid-range speaker (2) upwards from dashboard (3).

Fig 3: Identifying Mid-Range Speaker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (2) at mid-range speaker (3).

Release screws (5) on tweeter (4).

Pull out tweeter (4) upwards from dashboard (1).

Fig 4: Identifying Midrange Speaker And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.