51 16 210 Removing and installing/replacing cover for selector lever

Special tools required:

Partially fit special tool 00 9 340 as pictured.

Lift cover (1) all around and remove upwards.

If necessary, unlock associated plug connection and disconnect.

Fig 1: Removing Selector Lever Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (1) on cover (2) must not be damaged or missing.

Fig 2: Latch Mechanisms On Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Only F80/F82/F83 for replacement: