51 21 180 Removing and installing/replacing cover on outside door handle
Lever out the sealing (1) and undo the screw in area (A).
Installation note:
Make sure the sealing (1) is correctly fitted on the door.
Pull off cover (1) in direction of arrow with outer door handle (2) opened slightly.
Version with light package:
Installation note:
Make sure outer door handle light (1) is correctly positioned in area (2).
Guides (3) of outer door handle light (1) must be correctly seated in support for outer door handle (4).
Installation note:
Guides (1) must not be damaged.
Replacement
NOTE:
Similar to graphic.
Detach cover (2) from filler piece (3).
Installation note:
Latch mechanisms (1) of cover (2) must not be damaged.