41 33 050 Center Front Panel Replacement

Necessary preliminary tasks:

Most of operation is described on the left side. Right side identical.

Release screws (1).

Tightening torque 51 11 13AZ .

Unfasten screws (2).

Tightening torque 51 11 7AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove headlight mount.

Tightening torque 63 12 1AZ .

Release screws (2) and place hinge directly under front panel.

Tightening torque 51 23 1AZ .

Release screws (3).

Tightening torque 51 11 14AZ .

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 41 33 1AZ .

Remove cover (2).

Fig 3: Identifying Screws And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Press locks (1) together and pull the bearing pin (2) out toward the top.

Remove center front panel (3).

Fig 4: Removing Center Front Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Remount holder (1) for radiator.

Fig 5: Identifying Radiator Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rubber mount (1).

Unlock latch mechanisms for stop pads (2) and remove stop pads.

Fig 6: Identifying Stop Pads And Rubber Mount

Courtesy of BMW OF NORTH AMERICA, INC.

Slide lock (1) upwards in direction of arrow.

Turn the holder (2) for the rubber mount clockwise and take off.

Fig 7: Turning Rubber Mount Holder

Courtesy of BMW OF NORTH AMERICA, INC.