34 41... Removing and installing or replacing gaiter for handbrake lever

Special tools required:

Unclip gaiter (1), top, with special tool 00 9 317 , if applicable.

Installation note:

First insert the gaiter (1) on the bottom and then clip in on the top.

Fig 1: Locating Gaiter

Courtesy of BMW OF NORTH AMERICA, INC.

Pull gaiter (2) over parking brake lever.

Cut cable ties (1) and remove gaiter.

Installation note:

Eye of cable tie must face downward

Fig 2: Identifying Parking Brake Lever Gaiter And Cable Ties

Courtesy of BMW OF NORTH AMERICA, INC.